StarTech.com NETRS232 Uživatelský manuál

Rev. C02NETRS232One/Two/Four PortQuick Installation Guide

Congratulations on your purchase of a StarTech NETRS232. NETRS232s connect serialdevices to Ethernet networks. Any serial device—POS equipment, factor

2Hardware Setup1. Connect the power supply to the NETRS232 and to AC power.2. The power (red) LED will light to indicate that the unit is receiving po

3Software installation and configuration consists of the following:A. Running the NETRS232 setup softwareC. Activating and deactivating NETRS232 ports

4Configuring NETRS232 network settings using theConfiguring NETRS232 network settings using a web browserIP-Extender ManagerTo set a NETRS232's

5Choose the setting you wish to change.In the configuration screen that appears,enter the network settings you wish forthat NETRS232 device. Once the

6particular NETRS232 device, right click on that device in the left panel of theand select “Remove All”.Activating and deactivating NETRS232 ports on

This device complies with part 15 of the FCC Rules.Operation is subjectto the following conditions:(1) This device may not cause harmful interference,