StarTech.com USB1000IP Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Síťové karty StarTech.com USB1000IP. StarTech.com 10/100/1000 Mbps Gigabit 1 Port USB over IP Device Server Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
USB Device Server
10/100/1000Mbps Gigabit
1-Port USB over IP
Device Server
USB1000IP
Instruction Manual
Manual Revision:11/04/2010
For the most up-to-date information, please visit www.startech.com
Zobrazit stránku 0
1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - USB1000IP

USB Device Server10/100/1000Mbps Gigabit 1-Port USB over IP Device ServerUSB1000IPInstruction ManualManual Revision:11/04/2010For the most up-to-date

Strany 2 - FCC Compliance Statement

7SpecicationsNumber of Ports1Bus InterfaceUSB 2.0Chipset IDElite Silicon E3868M1Connectors1 x USB type A female1 x RJ45 Ethernet femaleLEDs1 x Power1

Strany 3 - Table of Contents

8Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ev

Strany 4 - Introduction

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans

Strany 5 - Side View 2

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC

Strany 6 - Installation

iTable of ContentsIntroduction ... 1Packaging Contents...

Strany 7 - How to Use

1IntroductionThe USB1000IP 10/100/1000 Mbps Gigabit 1-Port USB over IP Device Server provides a simple to use, and convenient way to extend a USB devi

Strany 8

2Side View 1Side View 2

Strany 9

3InstallationHardware Installation1. Connect the USB device that will be shared to the USB IP device server.NOTE: USB hubs are not supported by the US

Strany 10 - Specications

4How to UseUSB Server Software Setup1. Make sure the USB device is connected to the device server and it is powered on (if applicable).2. Double-click

Strany 11 - Warranty Information

5the proper network settings. Consult with the network administrator if unsure how to configure.4. The USB device connected to the device server shoul

Strany 12

6USB Device StatusStatus DescriptionThe attached USB device is ready and waiting for a connection.The USB device is on a different IP range than the c

Komentáře k této Příručce

Žádné komentáře