StarTech.com CAB831HDU Manuál s instrukcemi Strana 13
- Strana / 18
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Instruction Manual
10
Left <CTRL> + left <CTRL> + <6> + <C>
Selects a computer connected to port C of a Slave connected to port 6 of the Master.
Auto Scan, automatically scans power-on computers one by one at a xed interval:
Left <CTRL> + left <CTRL> + <F1>
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
till activity stops; it then resumes with the next computer in sequence. The length of
the Auto Scan interval (Scan Rate) is adjustable, see below. To abort the Auto Scan
mode, press the left <CTRL> key twice.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
Manual Scan enables you to manually switch back and forth between power-on computers.
Left <CTRL> + left <CTRL> + <F2>
Press < > or < > to select the previous or the next computer in sequence. Press
any other key to abort the Manual Scan.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
To adjust Scan Rate which sets the duration before switching to the next computer in
Auto Scan:
Left <CTRL> + left <CTRL> + <F3>
The Rack Console sends one to four beeps indicating scan interval of 3, 8, 15 and 30
seconds respectively.
To adjust keyboard Typematic Rate (characters/sec), this setting over-rides that of
BIOS and any operating system:
Left <CTRL> + left <CTRL> + <F4>
The Rack Console will generate 1 to 4 beeps corresponding to 10, 15, 20 and 30
characters/sec respectively.
Change Leading Hotkey
The default leading hotkey sequence involves pressing the left <CTRL> twice in
succession (e.g. left <CTRL>, left <CTRL>). This can be changed to the right <CTRL>
key instead, to avoid accidental activation due to using the left <CTRL> key for
functions such as Copy/Paste.
- CAB831HDU 1
- CAB1631HDU 1
- FCC Compliance Statement 2
- Table of Contents 3
- Introduction 4
- Installation 5
- Cascade Conguration 6
- Driver Installation 6
- Operating Your KVM Switch 7
- Advanced Functions 9
- Instruction Manual 10
- CH Display 11
- Position 11
- Country Code for Sun 11
- Hot-key commands 12
- Change Leading Hotkey 13
- Sun/Mac Keyboard Mapping 14
- Specications 16
- Technical Support 17
- Warranty Information 17
Související produkty a manuály pro Přepínače KVM StarTech.com CAB831HDU
Přepínače KVM StarTech.com USB, DVI KVM Console Extender w/ Serial & Audio Manuál s instrukcemi
(21 stránky)
(21 stránky)
Přepínače KVM StarTech.com SV231DVIUAHR Specifikace
(13 stránky)
(13 stránky)
Přepínače KVM StarTech.com SV565UTPU Specifikace
(19 stránky)
(19 stránky)
Přepínače KVM StarTech.com 32 Port Multi-user Cat5 Matrix IP KVM Switch Manuál s instrukcemi
(74 stránky)
(74 stránky)
Přepínače KVM StarTech.com SV431USBA Datový list
(2 stránky)
(2 stránky)
Sealey CST773 manuels
Manuels d'utilisation et guides de l'utilisateur pour Équipement Sealey CST773.
Nous fournissons des manuels en pdf 1 Sealey CST773 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentáře k této Příručce