StarTech.com S352BMU3N Uživatelský manuál

Manual Revision: 07/04/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual65. Place the front panel back on by placing it over the drive bay, and sliding it into place.6. Replace the screw using the Phill

Instruction Manual7Step 2. Set your RAID CongurationWARNING! In order to prepare your drives for RAID and Network operation, this enclosure will con

Instruction Manual8Available RAID CongurationsThe NAS enclosure supports 4 dierent RAID congurations. RAID is a storage technology that combines mu

Instruction Manual9Method 2: Connect the NAS enclosure directly to your computer (Standard Access)1. Connect an Ethernet cable (included) from the LA

Instruction Manual10Note: The administration account user name and password can be changed, and additional accounts can be added (See: Page 64 <Man

Instruction Manual11You can also click Cancel if you wish to complete additional conguration steps before formatting the hard drive.WARNING! Any data

Instruction Manual122. Select Map network drive.3. In the folder box, type the network path to the NAS Enclosure.Note: The default network path for

Instruction Manual134. Enter the Username and password for an active account on the NAS enclosure, and click the OK button.5. The NAS has now bee

Instruction Manual142. Click the Conguration Icon, the main settings status window is displayed. 3. From the main menu on the left hand side, selec

Instruction Manual154. The account page is displayed, select the New button from the account list. 5. Enter your desired name and password in the sp

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction Manual168. The account has now been created, and is listed in the account List box below. Note: A new folder for specic user content is

Instruction Manual173. Click Network, in the Main Menu on the left hand side, next click IP Settings.4. The IP Settings window is now displayed. By

Instruction Manual185. Click the Apply button to set your changes. Note: For detailed information regarding the best conguration for your network, p

Instruction Manual19Note: Some les are playable from the File and Folder mode of the web page but for more control we recommend the Audio and Video p

Instruction Manual202. A list of all supported music les that are available to the user will be displayed in the menu on the left hand side. Note

Instruction Manual21Play video les directly in your web browser, with the web based media playerYou can play video les saved on your NAS through any

Instruction Manual224. (optional) To stop and start playing the video le, use the play/pause button located at the bottom of the window.Note: An

Instruction Manual233. Double click the le of your choice to view the image le. Mobile App AccessThe NAS Enclosure is compatible with most WebDAV m

Instruction Manual24Advanced NAS OperationFrom the conguration page you can access advanced congurations and functions.Access Conguration Page1. A

Instruction Manual25View and edit System and Network Information listed in the status menuView or change System Information:1. Access Conguration Pa

Instruction ManualiTable of ContentsProduct Diagram ...1Front View ..

Instruction Manual26Click the change button to alter the Network device name, and Work Group. Enter your desired Host Name and Group Name then click t

Instruction Manual27If you have selected Automatic:If you would prefer to use one of our three pre-set SNTP servers, use the drop down menu to select

Instruction Manual28View Network Information:1. Access Conguration Page. (See: Access conguration page)Note: If you have navigated to a dierent pa

Instruction Manual29View PPPoE IP Address or Connect to PPPoE Internet ServiceDisplays the IP address that the NAS enclosure is connected to if the NA

Instruction Manual303. The Service Information window is now displayed. Through Service Information you can place a bullet in Enable or Disable de

Instruction Manual31View the current Disk Status1. Access Conguration Page. (See: Access conguration page)2. Click Status, in the Main Menu on the

Instruction Manual32Disk NameLists the drive and RAID Conguration enabled.Disk CapacityDisplays current information regarding available storage space

Instruction Manual332. Click Network, in the Main Menu on the left hand side, next click IP Settings.3. The IP Settings window is now displayed. Thr

Instruction Manual34If you have selected Static IP as below:Enter your desired IP information in each specied eld and click Apply. Note: For detail

Instruction Manual352. Click Network, in the Main Menu on the left hand side, next click PPPoE.3. The PPPoE window is now displayed. Through the PPP

Instruction ManualiiRestore Default settings to your NAS Enclosure (Reset) ... 51Enable or D

Instruction Manual36Enable and Congure DDNSWith DDNS you can assign an Internet Domain Name using a DDNS service for external access to your enclosur

Instruction Manual373. The DDNS window is now displayed.4. Select Enable from the bullet menu.If you are using a generic Dynamic DNS service, select

Instruction Manual38Note: It may take up to an hour for the DDNS server to refresh and direct to the Enclosure. For further assistance please contact

Instruction Manual39UPnP Port Mapping (Universal plug and play)Enables the enclosure to automatically nd and communicate with your router and open an

Instruction Manual40WebDAV URL: Displays URL used to access the WebDAV locally.FTP Listen Port: Displays and enables the user to alter the access port

Instruction Manual413. The Disk Management window is now displayed. From the Disk Management Window you can set a sleep timer, format your drive

Instruction Manual42You will receive a message alerting you that the format was successful, click the Ok Button.The Disk is now formatted.S.M.A.R.T (S

Instruction Manual43Manage your RAID Conguration1. Access Conguration Page. (See: Access conguration page)2. Click System Manage, in the Main Men

Instruction Manual44RAID ModeThe drop down menu shows the current RAID conguration.To delete the current RAID conguration click the delete button.WA

Instruction Manual45A message will appear warning that all written data will be lost. Click the OK button if you wish to continue.Upon creation of the

Instruction Manual1Product DiagramFront ViewRear ViewFront PanelDrive Activity LEDsPower ButtonLAN PortPower JackReset ButtonRAID switchUSB 3.0 PortMa

Instruction Manual46Update your NAS Enclosure Firmware Update1. Access Conguration Page. (See: Access conguration page)2. Click System Manage, in

Instruction Manual47WARNING! It is not recommended that a rmware upgrade be attempted unless specically stated on the StarTech.com website, or direc

Instruction Manual48Reboot Your NAS Enclosure remotely using the Web Interface1. Access Conguration Page. (See: Access conguration page)2. Click S

Instruction Manual494. To reboot the enclosure click the Reboot button.You will receive a message alerting you that all open connections will be rese

Instruction Manual502. Click System Manage, in the Main Menu on the left hand side, next click Shut Down.3. The Shutdown window is now displayed. F

Instruction Manual51Restore Default settings to your NAS Enclosure (Reset)1. Access Conguration Page. (See: Access conguration page)2. Click Syste

Instruction Manual52WARNING! It is recommended that all drive DATA be backed up prior to Resetting the NAS Enclosure. Lost drive data is not the respo

Instruction Manual53Enable or Disable SMB Service1. Access Conguration Page. (See: Access conguration page)2. Click App Server, in the Main Menu o

Instruction Manual54From the SMB Status section you can enable or disable SMB service.Depending on your preference place a bullet in Enable or Disable

Instruction Manual553. The WebDAV Server window is now displayed. From the WebDAV Window you can enable or disable the ability for your local com

Instruction Manual2IntroductionPackaging Contents• NAS HDD RAID Enclosure• Ethernet Cable• 1M USB 3.0 A to B Cable• Universal Power Adapter w/ reg

Instruction Manual56Enable or Disable FTP Service1. Access Conguration Page. (See: Access conguration page)2. Click App Server, in the Main Menu o

Instruction Manual57From the FTP Status select you can enable or disable FTP service.Depending on your preference place a bullet in Enable or Disable.

Instruction Manual583. The BT Download window now displayed. From the BT Download Window you can download and host Torrent les to and from exter

Instruction Manual59The Download Queue shows the status of currently hosted and downloading les. Note: Once you have added the torrent le you will h

Instruction Manual60Settings Opens the BT Option menu.The BT option menu enables you to set the following congurations using the value boxes listed:N

Instruction Manual61Mail NoticationEnables you to receiver an alert message via e-mail for each torrent le that has completed downloadingTo activate

Instruction Manual62Assign Folder for UPNP AV/DNLA Service and iTunes Playlists1. Access Conguration Page. (See: Access conguration page)2. Click

Instruction Manual63Select the drop down menu next to the specic media type that you would like to share using DNLA and UPnP AV.From within the drop

Instruction Manual64Manage Accounts1. Access Conguration Page. (See: Access conguration page)2. Click User Set, in the Main Menu on the left hand

Instruction Manual65Create an Account1. Click the New button.Enter your desired username and password in the specied elds.2. Next specify whether

Instruction Manual31. Using a Phillips head screw driver (not included) remove the screw from the bottom of the enclosure.2. Slide the “front panel”

Instruction Manual663. The account has now been created is listed in the account List box below.Note: A new folder for specic user content is also c

Instruction Manual67Enable an account1. Select the account from the account box, and click the Enable Button.Note: Enable/Disable button is displayed

Instruction Manual682. Select the folder from the Folder List box, and click the Right pointing Arrow button (Green) located between the Folder Li

Instruction Manual69Account Folder ManagementCreate a New Folder1. To create a new folder, click the Create button located in the Folder List box2.

Instruction Manual702. Enter your preferred new name in the New Name Box and Click OK.3. The Folder name has now been changed.Delete a FolderWARNIN

Instruction Manual71Quick Setup Guide (Optional)1. Access Conguration Page. (See: Access conguration page)2. Click User Set, in the Main Menu on t

Instruction Manual72Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction Manual43. Lift the panel o to reveal the drive bays.

Instruction Manual54. Slide each of your hard drives into the bay.