StarTech.com NETRS232_1 Manuál s instrukcemi stáhnout pdf (Strana 9)

6. Congure the device. The following network and port settings for the device can be

congured in a Telnet session:

Device settings (for the interface converter device):

• IP address

• Net mask

• Gateway

• NetBios name (Device Name)

• Workgroup

Port settings (for each serial port individually):

• TCP port number

• Port mode (see Advanced Settings on page 8 for a description of the

various port modes)

• Baud rate

• Data bits

• Parity

• Stop bits

• Flow control

After changing settings, the interface converter will be reset.

Instruction Manual

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Žádné komentáře

StarTech.com NETRS232_1 Manuál s instrukcemi Strana 9