StarTech.com PM1115UW Manuál s instrukcemi Strana 1

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Tiskové servery StarTech.com PM1115UW. StarTech.com PM1115UWGB print server Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 21
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Manual Revision: 05/12/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
PM1115UW / PM1115UWEU / PM1115UWGB
Wireless N USB 2.0 Network Print Server
*actual product may vary from photos
Zobrazit stránku 0
1 2 3 4 5 6 ... 20 21

Shrnutí obsahu

Strany 1 - Manual Revision: 05/12/2014

Manual Revision: 05/12/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Strany 2 - Industry Canada Statement

Instruction Manual6Note: The setup CD will install the print server driver, PSAdmin and Setup Wizard into your computer. The default installation dire

Strany 3

Instruction Manual75. From the “Select A Print Sever” screen, select the print server that you want to congure and click Next.

Strany 4 - Table of Contents

Instruction Manual86. Click “Yes, I want to change settings”, then click Next to congure the wireless and IP settings of the print server to match y

Strany 5 - Introduction

Instruction Manual9• Select your desired Communication Type: • Infrastructure (Access Point) • Ad-Hoc (Peer-to-Peer; default)• SSID: • If us

Strany 6 - Product Diagram

Instruction Manual10• Channel: optional• Data Transmit Rates: select Auto or others• Transmit Mode: select Auto or others• On the Wireless Securit

Strany 7 - Reset Button

Instruction Manual119. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down li

Strany 8 - Installation

Instruction Manual1210. Select Manufacturer and Printer from the lists of printer drivers. Then click Next. 11. If you already have the printer’

Strany 9

Instruction Manual1314. Click Start -> Printers and Faxes and highlight your newly installed printer.

Strany 10

Instruction Manual1415. Right-click, select Properties, then the Ports tab and verify that the print server’s port appears.

Strany 11 - Instruction Manual

Instruction Manual1516. Select the General tab and click Print Test Page to verify the conguration.Note: If you want to install more print servers,

Strany 12

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Strany 13

Instruction Manual16Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Strany 14

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Strany 15

Instruction Manual3IC Radiation Exposure Statement:This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled envi

Strany 16

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Strany 17

Instruction Manual1IntroductionPackaging Contents• 1x Wireless USB Print Server • 1x Power Adapter • 1x Software CD • 1x Quick Start GuideSystem R

Strany 18 - port appears

Instruction Manual2Product DiagramFront ViewRear ViewWLAN LEDWPS ButtonReset ButtonDC JackLED IndicatorsUSB PortEthernet Port

Strany 19

Instruction Manual3LED IndicatorsLED State IndicationStatus Blinking for POST (Yellow)When power is connected, the Status indicator will ash ve time

Strany 20 - Warranty Information

Instruction Manual4Default Settings Username: adminPassword: (None)Wireless Mode: Ad-Hoc (Peer-to-Peer)SSID: PM1115UWIP Address: 192.168.0.10Installat

Strany 21

Instruction Manual52. Insert the setup CD into your CD/DVD drive.3. Select “Run autorun.exe” from the Autoplay menu. If Autoplay is disabled on your

Komentáře k této Příručce

Žádné komentáře