StarTech.com RACKCONS2001 Manuál s instrukcemi Strana 1

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Rackové konzole StarTech.com RACKCONS2001. StarTech.com RACKCONS2001 rack console Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Folding Rackmount Console
1U 20.1” Folding LCD
Rackmount Console
- USB and PS/2
RACKCONS2001
Instruction Manual
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - Folding Rackmount Console

Folding Rackmount Console1U 20.1” Folding LCD Rackmount Console - USB and PS/2RACKCONS2001Instruction Manual

Strany 2 - FCC Compliance Statement

7Auto tunePress the “Auto tune” button. The panel will adjust the display size automatically and also tune the panel to its optimized state.Brightness

Strany 3 - Table of Contents

84. Use the Down and Up buttons to adjust the contrast of the display.5. Press the Menu button to save your selection.Position1. Press the Menu button

Strany 4 - Installation

9Recall1. Press the Menu button.2. Use the Down and Up buttons to scroll to Recall. Press the Menu button to enter, where you will be able to select Y

Strany 5

10SpecicationsRACKCONS2001Display Size20.1”Panel TypeActive Matrix TFT LCDResolution Capabilities1600x1200 @ 60Hz (max.)Back Lightsix lampsSupported

Strany 6 - Rail-Release switch

11RACKCONS2001 Dimensions

Strany 7

12Technical SupportStarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solutions

Strany 8 - Conguring Display Settings

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans m

Strany 9 - Testing the Console

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

Strany 10

iTable of ContentsIntroduction ... 1Packaging Contents...

Strany 11

1IntroductionPackaging Contents• 1 x 1U LCD Rack Console Drawer• 1 x VGA + PS/2 console cable• 1 x 3.5mm mini-jack audio cable• 1 x USB cable• 1

Strany 12

2Mounting the console1. Adjust the sliding rail until the screw underneath is visible. Loosen (do not release) the two rear screws then adjust the rea

Strany 13 - Specications

35. Gently extend the arms from the rails until they lock. Gently, but firmly insert the console into the left and right rails:6. There are small rele

Strany 14 - RACKCONS2001 Dimensions

48. Installation is now complete.How to UseConnecting the ConsoleTo connect the LCD console to a computer, perform the following steps:1. Turn off you

Strany 15 - Warranty Information

5Turning on the ConsoleMake sure all cables and the power adapter are connected properly. Be sure to tighten all connector screws. Grab the front hand

Strany 16

6and OSD functions. For more information on configuring the display settings, please refer to the manual that accompanied your video card.Testing the C

Komentáře k této Příručce

Žádné komentáře